Is the item regularly maintained? Planned maintenance could reduce the need for frequent ‘PAT Testing’ There is no formal legislation specifying the need for PAT testing. However, it is a legal requirement to ensure that electrical equipment is safe and fit for purpose. The expected regularity of PAT testing will depend on the results of workplace risk assessment procedures. When determining the need for PAT testing, the level of risk should also be considered.

There is no law which requires detailed records to be kept, although some system of recording what you have tested, and when, is certainly a good idea. Our advice is, as ever, to keep it simple! In many cases, depending on your business, an excercise book with hand written records is perfectly acceptable! None of the remaining equipment in use was thought to present a high risk, so the manager decided that full portable appliance testing was not needed for these items. PAT testing certificates will not show specific details of each individual appliance that has been tested. The detailed report will show this information. The certificate is an official form that provides proof of property being tested so that business owners can show their compliance with regulations. A label will be attached to appliances showing which have failed and which have passed PAT testing successfully. PAT testing forms are provided only by approved contractors who are registered with the NICEIC/ECA. Persons performing testing who are permitted to offer PAT testing certificates have to be deemed competent to perform these tests. she looked for electrical equipment in the shop and found that there were a number of computers, a fax, two printers and a vacuum cleaner;Schools – All class 1 equipment in schools should be PAT tested every 12 months. Class 2 equipment should be tested every 48 months

This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. Employers have responsibility for electrical appliance testing. However, it's quite common for this duty to be assigned to a ‘competent person’. The competent person should:Insulation testing involves connecting the tested appliance with the PAT. Typically, a test voltage of 500V DC is then applied to the mains plug terminals. This will ideally result in a high resistance reading being displayed on the PAT screen. However, insufficient insulation between the live parts and earth will result in a current flowing from the insulation to the PAT via the protective earth conductor. The low level of insulation will also be highlighted in the PAT reading. Professionals expected to perform testing duties will ideally complete the PAT testing course. It will also be necessary to invest in appropriate PAT testing equipment. How Often Should Equipment Be PAT Tested?