Pyhodi Motor Brushless Controller, 36V 48V 250W 350W 17A Brushless Speed Motor Controller, Brushless Motor Sine Wave Controller, Motor Controller Lithium Battery for Tricycle Scooter Bike

Product Information

Upgrade 3-stage PWM (pulse width modulation) charging algorithm, over-discharge or regular battery equalisation charge, effectively prevent the battery from the unbalanced or curing phenomenon, effectively extend the battery life (colloidal lithium batteries excluded). Our team considered several circuit options and chose a standard gate driver with external MOSFETs. By implementing this discrete component solution, we simplified the schematic design and cut development costs. As a result, Integra’s engineers achieved stable operation of the BDC motor controller in the range of 6 up to 24 volts and up to 25 amps.

In a BDC motor controller, the speed and torque are regulated by changing the power supply with the help of voltage regulators. They can be either a separate system or a part of the controller. For different purposes, engineers can use linear or switching regulators. Depending on the voltage necessary for the motor’s operation, you can choose a low or high voltage controller. A switching regulator works well for controllers with a wide operating voltage range. A linear regulator better suits a low voltage DC motor controller because the excessive input voltage may cause power loss and even thermal overload. Type of Control Signal

73 Comments

Our Pro-160 / 360 have settings that can prevent this damage, in short you need to do the following…. In addition to closed-loop control, advanced DC servo motors with a variable speed DC motor controller show high performance and reliability in complex industrial applications. This controller would not be powered from the 120 volt 60 hertz house power. This controller is powered by the DC 24 volt battery. Set the maximum current limit of the controller to be below that of the BMS, that way the controller will make sure that the BMS does not reach its threshold for tripping. PWM DC Motor Speed Controller】: Wide voltage input 7-80V, maximum output current 30A (Please refer to the recommended power range for actual use current. It is recommended that 12V within 300W, 24V within 400W, 48V within 450W, and 60V within 500W. ) Adjustable potentiometer soft cable (about 15CM) can be separated, with running stop brake function.

The common feature and the essential condition of all DC motors is the generation of a variable magnetic field that provides their non-stop operation. In an alternating current (AC) motor, a magnetic field changes polarity on its own.This controller has a wide range of applications and can be installed and used in multiple solar power scenes.