Joined in 2023 
82 
63 About this deal
Cut off the excess tape on the remaining exposed threads at connections that you can see. This will keep your work looking extra-professional at shower head connections or exposed plumbing underneath pedestal sinks. Conclusion If you don’t ride your motorcycle very often and water finds it’s way between the pipe and the wrap, it can cause your pipes to rust faster. Regular riding will combat this as it will dissipate the water. But for those who don’t ride very often, you’ll probably have to start up your motorcycle occasionally to get any residual water out from underneath the wraps. That can be pretty annoying.
Pipe Insulation and Lagging Tapes for Insulation - Pipe Insulation and Lagging
When I first started restoring motorcycles, I wasn’t very sure of what exhaust wrap was in the first place. I had restored a few motorcycles before I actually discovered what it was and what it was meant for. I started using it on some of my restorations and was quite pleased.
Specifications
The second pro of using exhaust wrap I’d like to point out is how well it can make the motorcycle look cosmetically if it is put on right. The constant heat the exhaust pipes are under can sometimes discolor them which doesn’t look very good. Exhaust wrap does an excellent job at covering up those blemishes while giving your motorcycle that extra look that people like. White Teflon tape comes in a single density. It’s made for water pipes that measure ? inches or less. You can also find it in silver color, on occasion, which is made to match the color of the pipe. Red Tape
Motorcycle Exhaust Wrap You Need To Know The Pros And Cons To Motorcycle Exhaust Wrap You Need To Know
Next, you’ll need to wear some rubber gloves especially if you’re installing the fiberglass wraps. Otherwise you’ll likely get little sores on your hands and they’ll itch like crazy. The last con and disadvantage of using exhaust wrap on your motorcycle is that after you install it, it smokes a lot and smells pretty bad for a little while. This is normal and considered part of the curing process, but that doesn’t make it any more pleasant. It usually takes a few hours of riding for that to resolve itself and there’s nothing you can do to initially stop it. How To Install Exhaust Wrap On Your Motorcycle Applying Teflon tape may seem simple enough, but since it has no adhesive properties, you have to make sure you wrap it in the right direction and in the right spot or you could end up with a balled-up mess. Here the steps to follow to wrap PTFE tape properly and get a leak-free seal. For plumbers, PTFE tape is essential when sealing up pipe threads before making connections. But, thanks to its many properties, there are many professional and casual uses for it.
Where to Buy
One of my favorite things about using exhaust wrap is how easily it can be installed by anyone in the comfort of their own garage. It can be done within an hour. There’s not a lot of tasks you can do to a motorcycle within that small amount of time that makes such a huge difference to the look of it.
Tapes - Pipe Lagging
Using wrap on your motorcycle exhaust pipes can also be a protective factor. While you’re out riding, your feet are close to those extremely hot pipes and it’s not unheard of to burn your feet or ankles or ruin a pair of boots. Exhaust wrap, though still hot to the touch while running, can greatly decrease your chances of getting a burn. With double the density of white tape, yellow PTFE tape is made for fuel lines and gas lines. Green Tape Don't let your plumbing give you the winter blues! We will show you how to prevent your plumbing from freezing and how to thaw frozen pipes. This is something you can’t do interchangeably. Though I have heard it does help spraying your pipes with some silicone beforehand, but I have never tried that and I’m not sure if that works or not. All in all, I can see why some may not want to use exhaust wraps on their motorcycle, but I personally feel like it looks good and the pros outweigh the cons. Hopefully this read has helped make your decision a little easier. Related QuestionsKeep the first two threads of pipe free of any PTFE tape. This will allow the pipe to engage the fitting and easily start your connection. If you’re wanting to prevent the wrap from staining the headers in case you want to take the wraps off in the future, you can try spraying your pipes with a high heat silicone coating before applying the wrap. Take the plastic sleeve off the exhaust wrap and soak the whole thing in water for several minutes. This will help it stretch a little which will give it a tighter fit while you’re wrapping it. Once the exhaust wrap has soaked for a few minutes, you’re ready to wrap it around your motorcycle exhaust pipes.
Tape: How To Use And Choose The Right One For You Teflon Tape: How To Use And Choose The Right One For You
Keep tension on the tape, ensuring that it is snugly wrapped around the pipe. As you overlap the tape, work gradually away from the end of the pipe to completely cover the threads. Teflon tape is made of polytetrafluoroethylene. That’s a mouthful, so it’s called PTFE for short. This PTFE tape comes pre-cut to a specific width and is then wound on a spool so you can decide how long your piece needs to be. Find out how to measure plumbing pipe size easily and accurately with our free tool. This handy ruler will save you money and frustration!
Product Specification
Other names for Teflon tape include plumber’s tape, PTFE tape, pipe tape, or thread tape. All of these names refer to the same thing, which is most widely known as “Teflon” tape.
Great Deal 
New Comment